S430 Pitot Tube Meter for Wet Air

The S430 is a meter that uses the pitot tube principle of flow measurement. This meter is designed to measure wet and dirty gases, as found in locations like the compressor discharge.

Reliable: ideal for compressor performance tests
Simple: effective, inexpensive, and fast measurements
Accurate: detailed metrics designed unpredictable outputs

Description

The S430 utilizes the pitot tube principle to measure wet and dirty gases that are found in places like the compressor discharge. This meter boasts long-term reliability, wide turn down ratio, and highly-consistent temperature stability. It can be used in both compressed air and non-corrosive gases, and it can even be installed through a ball valve while the system is still pressurized. Various output signals allow the meter to be connected to SUTO displays and/or third-party displays and PLCs.

Benefits

Faster Testing

Measure compressor outputs with ease

Easy to Use

Don’t worry about specialized equipment for smaller jobs

Better System Health

Safer for your workers and much easier to manage

Features

SUTO S430 Illustration

Features

Flow and consumption measurement in wet air or high mass flow / velocity applications
Measurement at compressor outlet
Tube diameters of 1.25’’ to 10” through center installation, bigger diameters through non-center installation
Insertion type, easy installation under pressure through ball valve possible
High temperature applications up to 230°C
No mechanical wear parts
All parts which are in contact with flow medium are made of stainless steel
Compressor-FAD-Measurement
Measures Flow, Consumption, Temperature and Pressure

Specs

Flow range: Refer to table below
Pressure range: 0 … 1.6 MPa
Temperature range: -40 … +230°C
Accuracy:
- Flow: ±(1.5%+0.3% full scale)
- Pressure: 0.5% F.S.
- Temperature: 0.5°C
Reference conditions: Programmable, default P = 1000 hPa(a), T = 20°C
Medium: Wet and dry air, non-corrosive gasses
Output signals:
- 4 … 20 mA and Pulse (optional)
- Modbus/RTU (optional)
- M-Bus (optional)
- Modbus/TCP (optional)
Medium temp.: -40 … +230°C
Ambient temp.: -20 … +60°C
Power supply: 24 VDC, 150 mA
Display option: 2.4” color graphic display with keypad
Process connection: 3/4” G type (ISO 228-1)
Meter material: Stainless steel 1.4404 (SUS 316L)